Raven CRX, Руководство по установке

Страница: 13 / 35

STEERING SYSTEM INSTALLATION | CRX + RS1 | RAVEN EUROPE GENERIC
PAGE 13/35 | Installation manual | 016-8000-028EN | Rev. A1
 If a ground switch is used in the tractor,
connect the wiring harness behind the ground
switch (not at the battery side of the ground
switch!).

If a main (12V) switch is used in the tractor, the
red wire connect the wiring harness behind the
main switch (not at the battery side of the
main switch!).

If no main switch is used, always connect the
wiring harness directly to the battery.
 If the system is connected to a 24 Volt
machine, always use a 24V to 12V converter.
Never connect between the two batteries of a
24V machine!

Lead the terminal harness along with the GPS
and radio/GSM antenna cables through one
pillar of the cab.

Tie-wrap the harnesses so they are attached
free from vibration and friction.
Caution!:
It is important to ensure that the wiring harness
is always connected to the battery AFTER
installing all wires and controllers!