7
7 - Increase/Decrease Rate Switch.
Note:
The INC/DEC switch only controls the selected product in automatic or
manual mode. Refer to the field computer or control console manual for
more information on selecting products during application.
For selected products set to automatic control mode, the INC/DEC switch is used
to increase or decrease the target rate of products selected and actively displayed
on the console or field computer.
In order for this switch to work properly, a ‘Rate Bump’ (Rate +/-) value must be
programmed for each product. Refer to the control console or field computer
operation manual for more information on programming this feature.
For selected products set to manual control mode, holding the INC/DEC switch
will open or close the product control valve, increasing or decreasing the flow of
product respectively. Refer to the control console or field computer operation
manual for instructions on programming products or switching a product to
manual mode.
8 - Master/Override Switch.
The master switch toggles all section switches on or
off. When the master switch is in the ‘ON’ position, each section will function
according to the corresponding section switch (see the “Section Switches” section
on page 6). Toggle the master switch to the ‘OFF’ position to turn all boom or
implement sections off.
Toggle the master switch to the ‘OVERRIDE’ position to operate all seed disks
one full revolution to prime the seed disks. Holding the master switch in the
‘OVERRIDE’ position will temporarily override any sections controlled by an
optional AccuRow system on.
