Raven AutoBoom 9600, Руководство по установке, Страница: 55 / 79

5
Manual No. 016-0230-096 49
ULTRAGLIDE
CONVERT THE SPRAYER’S HYDRAULIC VALVE TO OPEN CENTER (IF APPLICABLE)
By factory default, the machine’s main hydraulic valve is configured as a “closed center” hydraulic system. In order
for AutoBoom to function properly and to prevent the hydraulic system from overheating, Raven recommends
converting the machine’s hydraulic system to an “open center” system.
NOTE: Contact your Fast dealer to obtain the open center conversion kit.
FIGURE 1. Converted Hydraulic Valve - Closed Center to Open Center
INSTALL FITTINGS ON THE AUTOBOOM VALVE
Before mounting the AutoBoom valve on the machine, install the proper fittings on the valve. This prepares the
valve for installation and simplifies the hose connection process later in the procedure. Refer to the following table
to install the fittings in the appropriate ports of the AutoBoom valve.
FIGURE 2. Fittings Installed on the AutoBoom Valve
Fitting Part Number Port
Fitting - 9/16” JIC (M) to 9/16” SAE O-Ring (M) Straight Adapter 333-0012-045 LC, RC
Fitting - 3/4” JIC (M) to 3/4” SAE O-Ring (M) Straight Adapter 333-0012-093 Left T, P, EF