Ravelli Vittoria V, Руководство по эксплуатации и обслуживанию

Страница: 9 / 36

Use and maintenance manual for stoves with touch remote
Pag.9
Rev.0 05/12/2022
Compliance status
This manual describes the installation and operation of the Ravelli, Vittoria V, Atena V and RV 120 Touch wood pellet heater. This
heaters meet the 2020 U.S. Environmental Protection Agency’s wood pellet emission limits for wood heaters sold after May 15
th
2015.
Under specific test conditions this heater has been shown to deliver heat at rates ranging from 12900 to 37000 Btu/hr.
Emission Rate (g/hr)
Heating Efficiency
(% Overall)
1st hour Emission
Rate (g/hr)
CO emission gr/hr
Vittoria V 0.6 79.25% 2.19 2.8
Atena V 0.6 79.25% 2.19 2.8
RV 120 Touch 0.6 79.25% 2.19 2.8
Spare parts
Use original spare parts only. Do not use any substitute material. Do not wait for the components to be worn before replacing them.
Replace a worn component before it is completely broken to prevent any accidents caused by the sudden breakage of components,
perform the periodic maintenance checks as described in the dedicated chapter. Removal of broken or damaged components shall
be only done by authorized technical service.
Glass and gasket replacement
Use only ceramic type glass. To replace the glass the door needs to be disassembled according to the below drawing.
Vittoria V - Atena V - RV 120 Touch
Ceramic glass dimensions:
272 x 510 mm (10.71’’ x 20.08’’)
thickness 5mm (0.20’’)
Glass ribbon trecotee gasket:
8 mm x 3 mm (0.31” x 0.12”)
L1540 mm (60.63”)
Door tricovet gasket:
diam. 10 mm (0.39”)
L1680 mm (66.14”)