Ravelli Magnus, Руководство по эксплуатации и обслуживанию

Страница: 19 / 72

Use and maintenance manual Magnus
Pag.19
Rev.1 21/04/2021
Automatic cleaning system
The stove is equipped with atuomatic brazier cleaning system. This means that there is no need to carry out daily manual cleaning
of the brazier or every time the stove is lit. The automatic cleaning system is activated every time the stove is lit and after 6 hours of
continuous operation. The cleaning cycle, which involves shutting down, automatic cleaning and restarting the stove, takes about
10 minutes. During this period the heating is guaranteed by the heat accumulated by the appliance itself.
Note: the times indicated are those set by default by the Manufacturer.
Recharge the fuel
⚠
Use only wood pellets, the characteristics shown in this manual.
⚠
During pellet loading prevent the pellet bag from coming into contact with hot surfaces.
📌
It is not recommended to empty the pellet bag directly into the hopper to avoid depositing wood sawdust on the bottom of
the hopper.
To load the pellets inside the hopper, proceed as described below:
step
1 Open the pellet hopper cover
2 Pour the pellets into the hopper
3 Close the pellet hopper cover
When the pellet is running out, the signal appears on the display thanks to the sensor with which the fireplace is equipped.
User training
Once installation is complete, the user must always be fully trained in the functions and characteristics of the stove by the technician
authorized by Ravelli to ensure optimal and safe use.
The training should cover the following topics:
• Description of the stove, its operation and basic settings
• How to turn the stove on and off safely
• Fuel storage and refilling
• What to do in the event of an alarm, in particular that of “no ignition”
• How to clean the stove correctly and the importance of performing it on a regular basis
• It is advisable to schedule the first annual maintenance