Ravelli Chronos, Руководство по эксплуатации и обслуживанию

Страница: 77 / 196

Use and maintenance manual Chronos, Zeus, Ercole e Ermes
Page 77
Rev.1 12/12/2019
Adjustment of the door
The door may "hang" a little over time. This can be solved by adjusting the adjustment screw of the door upwards using an 8 mm
open-end spanner. The adjustment screw is placed at the top of the hinge as shown below.
A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR: EMNE:
C:\Working Folder\Designs\Scan 1003\91003012.idw
91003012
Justering af låge
22-10-2018
ken
Scan 1003
VÆGT:
AREAL:
N/A
N/A
A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR: EMNE:
C:\Working Folder\Designs\Scan 1005\91005032.idw
91005032
Justering af låge
22-05-2018
ken
Scan 1005
VÆGT:
AREAL:
N/A
N/A
Testing and commissioning
The insert must be put into service before it is put into service, and the following elements must be tested for operation:
connection to the smoke evacuation system; check that all materials for the construction of the smoke duct, flue, chimney, are compli -
ant and suitable for use.
The test is positive only when all the operating phases are completed without any anomalies being detected.
Connection of the smoke connection
The insert is factory set for a superior smoke outlet. Mount the fitting on the insert, once placed in the cassette.
If the radiation plate was removed before installation, remember to put it back in place before putting the combustion chamber back
into the cassette.
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR: EMNE:
C:\Working Folder\Designs\Scan 1003\91003014.idw
91003014
Montage røgstuds
16-11-2018
KEN
Scan 1003
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR: EMNE:
C:\Working Folder\Designs\Scan 1003\91003014.idw
91003014
Montage røgstuds
16-11-2018
KEN
Scan 1003
VÆGT:
AREAL:
N/A
N/A
Radiation plate
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR: EMNE:
C:\Working Folder\Designs\Scan 1003\91003014.idw
91003014 Montage røgstuds
16-11-2018
KEN
Scan 1003
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE: DATO: SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR: EMNE:
C:\Working Folder\Designs\Scan 1003\91003014.idw
91003014
Montage røgstuds
16-11-2018
KEN
Scan 1003
VÆGT:
AREAL:
N/A
N/A
4 x flange nuts M6
Mount the 3 x 8 mm gasket on the edge of the flange of the fitting. Secure the fitting with the flange nuts.
NB: The chimney must be mounted with the 1 m rigid pipe supplied.
The gasket