RE / DD / UM / 2508 V1.2- 01
52
RESET Key:
When the Reset key is pressed, after entering user or
admin password, the control panel will:
¾
Clear the status LED’s.
¾
Bring back the LCD display to the healthy condition.
¾
Turn off the Notification Appliance Circuits.
¾
Reset fire zones by temporarily removing power.
¾
Restore all system relays to normal.
¾
Temporarily remove power from the resettable power output CN7.
The Reset key is accessible only after silencing in alarm condition.
Any alarm, supervisory or trouble condition that exists after a system
reset, will resound the system, reactivating normal system activity.
ACK. Key:
This key is used to acknowledge the buzzer tone during
the fault and fire condition. This key can be operated with user or
admin password.
EVACUATE Key:
This key is used to energize the all-external NAC’s
without actual fire, It will operate at user or admin level. Using the
silence key NAC output can be silenced.
ENTER KEY:
This key is used to accept the password during silence,
reset in Fire Condition And also used for the Evacuate and wherever
requires.
ENTER Key:
To accept the programmed or edited menu, mode or
value in the LCD.
CURSOR KEYS
:
The cursor keys (Right / Left arrows) are used to move
the cursor point wherever required.
ALPHANUMERIC KEYS
:
These keys are used for entering the names
etc. and numbers. ‘*’ Key is used to go back the previous screen in
programming mode. ‘#’ key is used to change the status of modes.
“0” is used for the Lamp test in system healthy condition.
Содержание RE-2504
