10
You may make a printout and add up the weights. A special printout will be made
which includes the code. (See option printer).
NOTE: if the code is “000000” it will be ignored and it will not be printed on the ticket.
PIECE COUNT: SAMPLING
If an unknown piece weight is to be determined you may do this by sampling a
certain number of pieces. The number of pieces taken from or placed on the
weighing system determines the accuracy of the sampling. The total weight of the
pieces taken from or placed on the weighing system for the sampling should be no
less than 4-5 kg. The greater the weight difference, the greater accuracy. The
standard sampling amount is 10 pieces, but this number can be increased up to 95
pieces.
NOTE: If the accuracy is too low when sampling, the indicator will show “ERR05”.
Press any key to return to piece counting mode and increase the sampling amount.
Press the
key.
The display shows “add10”. The ‘kg’ pointer turns off and the ‘pcs’ pointer
goes on.
Take or place 10 pieces from/on the weighing system and press the ENTER (
↵
)
key.
The sampling is done and the display will show the total number of pieces on
the weighing system.
Or
Press the
∧
key or the
∨
key to change the number of pieces to add.
The display will show the new value to add (for example “add50”).
Take or place the correct number of pieces from/on the weighing system and
press the ENTER (
↵
) key.
The sampling is done and the display will show the total number of pieces on
the weighing system.
You may make a printout and add up the weights. A special printout will be made
which includes the piece weight sampled and the number of pieces. (See option
printer).
To return to the normal weighing mode press the
key for 3 seconds. Once your
return to normal weighing mode the piece count total will be lost.
PIECE COUNT: ENTER A PIECE WEIGHT
Press the
key for 3 seconds.
The last used piece weight will be displayed with the right digit flashing.
To accept the old value press ENTER (
↵
).
The display shows the number of pieces currently on the weighing system.
Or
Press the
key for 3 seconds.
