Page
21
of
26
Printer manual
Though paper can be inserted either from the front or side of the printer, front paper insertion may
result in paper jams, depending on the condition of the paper. Because of this, it is recommended that
you always insert paper from the side.
This printer is equipped with paper sensors, so you do not have to perform any special procedure to
align the location from which printing should start. Simply insert the paper into the printer and the
sensor locates the top of the paper. The paper will be moved automatically into position for printing.
Important!
When inserting the paper into the printer, make sure that there are at least 3 cm
between the top edge of the paper and the print start position mark on the
printer. Otherwise the paper sensor may not be able to correctly locate the top
of the paper.
Push the right edge of the paper into the printer until it stops. At that time, the
PAPER OUT
indicator will go out, and the printer mechanism will automatically align the paper for printing
from the top.
Send data from your host computer to be printed on the paper.
After printing, press the
RELEASE
button to automatically release the paper.
