Page
19
of
26
Printer manual
To remove the old inkt ribbon, Hold the spool and lift gently, rotating it until the ribbon sags.
Push the ribbon detecting lever out, lift the spool until it comes off the shaft. Remove the second
spool in a similar manner. (See drawing 2).
(Do not apply excessive force when lifting spools.).
Drawing 2
Unwind ribbon so that the spools are separated as shown in drawing 3.
Drawing 3
Hold the ribbon taut as shown with the drive pins facing down and slide the ribbon between the
print head and the platen. While keeping the ribbon taut, wrap one side around the black ribbon
guide on the end of the platen and drop one spool on the spool shaft. As you move the spool
downwards, move the detecting lever aside to allow the spool to drop into place. Make sure the
spool drive pins engage with the spool drive holes. As the spool drops into place there will be a
click.
While continuing to hold the ribbon taut, install the remaining ribbon spool in a similar fashion.
Turn the spool that rotates freely to take up the ribbon slack.
Paper rolls
Order nr.:
Description:
Dimensions:
PRP-PAP-STAR-PIN
paper, single, pin feed, white
114xØ70xØ12 mm.
PRP-PAP-STAR-ADH
paper, self adhesive, pin feed, white
114xØ70xØ12 mm.
