Ravanson XPB-700, Руководство пользователя

Страница: 18 / 62

18
IV. SPIN DRYING
ATTENTION!
During spin drying, the drain hose must be fixed to the local sewer system.
The spin-dried water is discharged from the spin dryer on a current basis through a drain hose.
The failure to discharge water during a spin drying cycle poses a threat of spin dryer overflowing and
damage.
1. After the washing cycle is finished, remove the laundry from the washing chamber and place it in the
spin drying chamber
2. Distribute the laundry evenly and cover with the protective disc carefully (3) - see FIG. II. The
protective (covering) disc must press the spin drying chamber load horizontally. It
protects the
laundry against being thrown outside the drum when spin drying - see FIG. V. Always cover the
laundry!
ATTENTION!
Ensure the covering (protective) disc in inserted in the spin dryer chamber correctly.
Otherwise, during spin drying, the laundry will hit the housing with high speed and force,
which may damage the device.
OK WRONG
3. Close the inner lid of the spin drying chamber and the transparent outer lid
ATTENTION!
The spin dryer will not start when the outer (transparent) lid is open!
4. Using the spin drying timer knob (4) - see FIG. III CONTROL PANEL select the required spin drying time
(1 to 5 minutes)
5. The spin dryer starts work based on the selected spin drying parameter
6. After the cycle is finished, the spin drying timer knob goes to 0 position automatically.
ATTENTION!
The spin dryer has a brake activated when the outer lid is open. It is not recommended to open the outer lid
of the spin dryer when running. When it is necessary to open the lid, the brake will activate and spin drying
will be stopped.
When the spin dryer fails to stop, discontinue the cycle and contact the maintenance service.
Do not use the spin dryer with a damaged braking system!
WARNING!
Wait until the spin dryer stops entirely. Do not insert hands into the spin dryer chamber when running!
The suggested spin drying time for various textiles:
•
Shirts - 1-2 minutes
•
Bedclothes- 3-5 minutes
•
Work clothes - 5 minutes
V. RINSING
1. Rinsing can be carried out in the washing chamber. Repeat the washing programme three times:
Washing - spin drying/ Washing - spin drying/ Washing - spin drying.
Add the laundry conditioner to the last, third washing cycle. After the rinsing and water drainage cycle has
finished, put the laundry to the spin dryer and carry out the last spin drying cycle.
Rinsing can be carried out directly after water has been drained from the washing chamber or after the first
spin drying which is recommended for improved washing effect.