Ravanson XPB-700, Руководство пользователя

Страница: 17 / 62

17
PLEASE NOTE!
To ensure correct discharge of water from the spin dryer and excess water from the washing machine,
connect the drain hose to the local sewer system before you start filling the device with water.
3. Open the tap and fill the washing machine chamber with the appropriate amount of hot water, with
the temperature depending on the laundry type
WARNING!
For safety reasons, to avoid the risk of scalding, the temperature of water should not exceed 60
o
C!
The amount of water is indicated on the filter housing - see FIG. VI
H – maximum level of water
M – minimum level of water
PLEASE NOTE!
Always fill the washing chamber with water to the level above the indicated minimum level.
PLEASE NOTE!
When the maximum level (H) is exceeded, water will overflow through the opening and will be drained by
the drain hose to the drain hole.
4. Dissolve the appropriate amount of washing agent in water, appropriate for the laundry amount and
water hardness. Follow the washing agent manufacturer's instructions
5. Place the prepared laundry load in the washing machine chamber
6. Close the washing machine lid
7. Connect the plug to the mains
8. Using the washing timer knob (2) - see FIG. III CONTROL PANEL set the required washing time (3, 6, 9,
12 or 15 minutes). You can also select the time between the said values
9. Using the work mode knob (3) - see FIG. III CONTROL PANEL – set the washing machine work mode
depending on the type of textiles and laundry soiling: gentle or standard
10. The device starts running in line with the set washing parameters and after the cycle is finished, the
washing timer knob goes to 0 position automatically.
WARNING!
Do not insert hands into the washing chamber when running!
ATTENTION!
The washing machine runs in the "washing-stop-washing" cycle. After a specific number of rounds
rightwards (or leftwards), the drum stops for a couple of seconds and then starts turning the other way
round.
The sample washing time for various types of textiles and the degree of their soling:
Textile type and soiling degree
Washing time (min)
Slight soiling
Silk, wool, synthetic fibres
5 – 7
Cotton, linen
7 – 10
Intense soiling
Silk, wool, synthetic fibres
8 – 12
Cotton, linen
10 – 15
III. DRAINING THE WASHING CHAMBER
The device has a gravity water discharge system. After the washing cycle ends, turn the work mode knob (3) -
see FIG. III ONTROL PANEL - to the
water drain position and remove water from the washing chamber.
ATTENTION!
Water is drained from the washing chamber only after the work mode knob (3) is set to water drain position
(the solenoid valve opens and water goes through the hose), and the location of hose in the drainage position
when washing does not result in water discharge.