CAUTION: For their own safety, keep the package (cardboard, Styrofoam, plastic bags, etc.) away from your
children.
Note: The replacement of the cylinder should be carried out in a non-flammable environment.
The space heater includes a safety device, which turns the device off and extinguishes the pilot flame if the
ventilation in the premises is insufficient or the concentration of CO2 exceeds the maximum stipulatedby
law.
It is usual for this device to operate in very small premises. If the flame does go out, ventilate the room well
and wait a few minutes before reigniting the space heater.
VIII. OPERATION
PLEASE NOTE!
Before lighting the heater, smell to device vicinity for the presence of fire. Gas can be smelled at the floor level
as LPG is heavier than air and keeps near the floor.
Attention: before using the space heater for the first time and after long periods of non-use, we recommend
switching on the control buttons several times alternately and without gas flow in order to facilitate its
operation.
The space heater can be regulated to three different heat intensities: MAXIMUM, MEDIUM and MINIMUM. The
ignition mechanism is piezo-operated.
Open the gas outlet by rotating the lever on the regulator to the correct position (Fig.2).
Fig. 2
Turning on the space heater
Press the button and rotate it to your left, holding it down for 20 seconds. Repeat this procedure several times if
necessary until the pilot light ignites near the bottom part of the protective screen guard (where the spark is
seen), Fig.3 and keep pressing the button for 10 seconds. If, on releasing the button, the flame goes out, please
repeat the whole procedure.
For MINIMUM heat - Rotate the button to
For MEDIUM heat - Rotate the button to
For MAXIMUM heat - Rotate the button to
Fig. 3
