Ravaglioli YUCON T700, Техническое руководство, Страница: 28 / 50

10 POWER SUPPLY
The equipment is powered by the mains through a specific power supply cable.
The equipment must be connected to the mains through the supplied specific power cable;
respect the applicable voltage, frequency and power values.
The voltage, frequency, and power values that can be applied can be found on the tag located
near the main switch.
The mains plug must be used to disconnect from the mains.
Do not position the equipment so that it becomes difficult
to disconnect it from the mains.
Do not use extension cords to power the equipment.
Proceed as follows:
1.
Stand on the correct side of the equipment.
2. Connect the power supply cable to the specific connector.
3. Connect the power supply cable to the mains via a grounded socket.
en | 27 | YUCON |
Ravaglioli | 2024-03-01