Ravaglioli YUCON T700, Техническое руководство, Страница: 14 / 50

The equipment was designed to be used in specific
environmental conditions.
Using the equipment in environments with temperatures
and humidity that differ from those specified may impair its
efficiency.
Safety measures:
•
Place the equipment in a dry area.
•
Do not expose or use the equipment near heat sources.
•
Place the equipment where it can be properly ventilated.
•
Do not use corrosive chemicals, solvents or harsh detergents to clean the equipment.
• If storing the device for a long period of time, disconnect it from the power mains and
put it in a safe place, where it is not exposed to outside weather conditions.
The equipment was designed to be mechanically sturdy
and suitable for use in the workshop.
Careless use and excessive mechanical strain may impair
its efficiency.
Safety measures:
• Do not drop, shake or bump the equipment.
• Do not place the equipment where it could fall into water. Avoid any contact with water.
•
Do not place any objects on the cables or service hoses.
•
Do not perform any kind of intervention that may damage the equipment.
•
Do not use the touchscreen with sharp objects or any other kind of objects that may
damage it.
• Do not access the components inside the equipment unless explicitly requested by
specific maintenance operations indicated in this manual.
The equipment was designed to be electrically safe and to
work with specific supply voltage levels.
Failure to comply with the specifications related to the
power supply may impair its efficiency.
Safety measures:
•
Do not expose the equipment to water or other liquids.
• Do not use external batteries to power the equipment.
• Do not use extension cords to power the equipment.
The electromagnetic compatibility tests carried out on the
tool guarantee that it can be adapted to the technologies
normally used on vehicles (e.g.: engine check, ABS, airbag,
etc.). Nevertheless, if malfunctions occur you should
contact the vehicle's dealer.
en | 13 | YUCON |
Ravaglioli | 2024-03-01