background image

Operator's Manual SA 250/360/601/WB 250 

RAUCH Landmaschinenfabrik GmbH

26

5.

Warranty conditions

RAUCH fertiliser spreaders are manufactured with modern production methods
and with the greatest care and are subject to numerous inspections.
Therefore RAUCH offers a 12-month warranty subject to the following conditions:

1.  The warranty begins on the date of purchase.

2.  The warranty covers material and manufacturing faults. Our liability for third-party products

(hydraulic system, electronics) is limited to the warranty of the manufacturer of the equipment.

During the warranty period manufacturing and material faults are corrected free of charge by

replacement or repair of the affected parts. Other rights extending beyond the above, such as

claims for conversion, reduction or replacement for damages that did not occur in the object of

supply are explicitly excluded.

 

Warranty services are provided by authorised workshops, by RAUCH factory representatives or

the factory.

 

3.  The following are excluded from coverage by the warranty: natural wear, dirt, corrosion and all

faults caused by improper handing and external causes. The warranty is rendered void if the

owner carries out repairs or modifications to the original state of the object of supply. Warranty

claims are rendered void if RAUCH original spare parts were not used.

 

Please follow the directions in the operator's manual closely. In all cases of doubt contact our

factory representatives or the factory directly. Warranty claims must be submitted to the factory

by 30 days at the latest after occurrence of the problem. The date of purchase and the serial

number are required. If repairs under the warranty are required, they must be carried out by the

authorised workshop only after consultation with RAUCH or the company's appointed

representatives.

 

The warranty period is not extended by work carried out under warranty.

 

Shipping faults are not factory faults and therefore are not part of the warranty obligation of the

manufacturer.

 

4.  No claims for compensation for damages that are not part of the fertiliser spreader itself will be

accepted. This also means that no liability will be accepted for damages resulting from

spreading errors. Modifications made to the fertiliser spreader may result in consequential

damages and the supplier will not accept any liability for such damages.
In the event of intent or gross negligence of the owner or a senior employee and in cases faults

in the object of supply cause personal injury or damage to private property the supplier's limit to

liability will not apply. It will also not apply in the case of faults in properties that are explicitly

assured, if the assurance had the purpose of protecting the purchaser against damage that

does not arise from the object of supply itself.

Содержание SA 250

































Отзывы: