Rauch QUANTRON-A AXIS-M 20 EMC, Инструкция по эксплуатации

Страница: 62 / 116

Operation QUANTRON-A 4
56
New calibration of the forward speed signal:
You can either overwrite an existing profile or create a profile in an empty memory
location.
1. Select the desired memory location in the Tractor calibration menu using
the function key below.
2. Select the New calibration field.
3. Press the Enter key .
 The Tractor (km/h) calibration menu is displayed.
Figure 4.16: Tractor (km/h) calibration menu
[1] Tractor name field
[2] Display of origin of speed signal
[3] Display of number of pulses over 100 m
[4] Automatic calibration sub-menu
[5] Radar pulse transducer
[6] Wheel pulse transducer
4. Highlight the Tractor name field .
5. Press the Enter key .
6. Enter the name of the profile.
Entering text into the control unit is described in section 4.13.1: Text input, page
82 .
7. Select the pulse transducer for the forward speed signal.

For Radar pulses press the F1 function key.

For Wheel pulses press the F2 function key.
 The display shows the pulse transducer.
NOTICE
Entering the name is restricted to 16 characters .
We recommend using the name of the tractor for ease of understanding.
1
2
4
3
5
6