Rauch QUANTRON-A AXIS-M 20 EMC, Инструкция по эксплуатации

Страница: 27 / 116

Attachment and installation
21
3
3.3 Connecting the control unit
Depending on the equipment, there are different methods of attaching the control
unit to the fertilizer spreader. Schematic connection diagrams:

for standard connection, see page 22 ,

for connection to the wheel sensor, see page 23 ,

for connection to the wheel sensor and machine cable, see page 24 .
Proceed in the following order.

Select a suitable position in the tractor cabin (within the driver's field of vi-
sion ) to fix the control unit.

Fix the control unit by means of brackets in the tractor cabin.

Connect the control unit to the 7 pin socket or to the forward speed sensor
(depending on configuration).

Connect the control unit to the actuators of the machine using the 39-pin ma-
chine cable.

Connect the control unit to the tractor's power supply using the 3-pin plug con-
nector.
NOTICE
After the control unit has been switched on, QUANTRON-A the display shows
the machine number for a short time.
NOTICE
Note the machine number
The control unit QUANTRON-A is factory-calibrated for the fertiliser spreader
with which it has been delivered.
Only connect the control unit to the correct fertiliser spreader.