Rauch MDS 14.2, Инструкция по эксплуатации

Страница: 90 / 146

Calibration and discharging residual material 9
84
9.2 Carrying out the calibration
Requirements:

The metering slides are closed.

PTO and tractor engine are switched off and locked to prevent unauthorised
starting.

An adequately sized hopper is ready for collecting the fertiliser (minimum ca-
pacity
25 kg ).
- Determine the empty weight of the collecting vessel.

Prepare the calibration test chute. See figure 9.3 .

A sufficient quantity of fertiliser is placed in the hopper.

The preliminary settings for the metering slide stop, the PTO speed and the
calibration test time are specified and known from the fertiliser charts.
n
WARNING
Risk of injury due to chemicals
Escaping fertiliser may lead to injury to eyes and nasal mucous
membrane.
 Wear safety goggles during the calibration.
 Before running the calibration test, ensure that all people
leave the hazard zone of the machine.
NOTICE
Select the values for the calibration test in a way that the largest quantities of
fertiliser possible are calibrated. The higher the quantity, the higher the preci-
sion of the measurement.
[1] Calibration test chute
Figure 9.3: Position of the calibration test
chute
1