Axis-H EMC implement ECU update
Installation and configuration of the update tool on the
PC
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: [email protected]
Page
3
of
4
27.10.2014
Chapter 401
2. Configuration of the update tool
Connect the update cable to the desired interface
Note: If the update cable is connected to the USB port for the first
time, a driver is installed automatically. For this, an internet connection
may be required.
a. PEX-Loader
Open the PEX-Loader by double-clicking on the icon.
The installation is completed
and an icon is created on the
desktop:
Select the
operating language
Set the Baud rate
to 115200
Select the
USB/serial
interface (not
AUTO!)
