Part IV Wiring Diagram
18
Use the special tools to remove the flywheel, and do not use the hard objects to knock it to
avoid damaging the flywheel.
When the flywheel is removed, the semicircular key on the crankshaft may be brought
out. Please check the existence of the semicircular key before installing the flywheel.
3)
Ignition coil
a)
Primary coil
Connect one ohm detection wire to the primary
terminal of the ignition coil, and make the other
detection wire contact with the iron core, and then
measure the resistance of the primary coil.
Resistance value on the primary coil side
1.46
b)
Secondary coil
Remove the spark plug cap, connect one detection
wire to the spark plug wire, make the other wire
contact with the coil core, and then measure the
resistance of the secondary coil.
Resistance value on the secondary coil side
7.5
Failure to remove the spark plug cap may lead to incorrect values.
c)
Spark plug cap
①
Resistance value
