Part IV Wiring Diagram
25
b) Clean thoroughly with compressed air before
assembling.
c) Clean thoroughly with compressed air before
assembling.
Before assembly, please confirm whether the oil cup sealing washer exists.
f) Inspection
Float height
Place the carburetor as shown in the figure. When the float valve just touches the float seat and the spring is
not compressed, measure the distance between the top of the float valve and the carburetor body.
Specified float height
23mm
In case of inconsistency between the actual float height with the specified value, please replace the float or
the float valve and then reinspect the float height. (The figure below is for reference only. Please measure
the relative position of the physical object)
Master nozzle
Main metering hole
