Rational MI 2123, Инструкция по модификации

Страница: 12 / 104

1 | MI_2123: Second water connection - removal and installation
12 / 104
4. For floor units: Both inlets (5) (6) can be used for gas and electric units. If
one of the inlets is already occupied, use the other inlet.
5
6
5. Insert the connection adapter roll guide (4) into the inlet from below and
screw it onto the first nut (1) from above. Firmly tighten the nut (1). When
tightening it, hold on to the connection adapter roll guide (4).
6. Place the second nut (1) as a counter nut and tighten this nut (1) as well.
7. Take the hose (7) towards the roll guide from the solenoid valve block (8)
and attach it to the newly set connection adapter roll guide (4).
7
8
8. Secure the hose (7) again with the plug spring of the roll guide.
9. Insert the plug distributor (2) into the free hose connection on the solenoid
valve block (8) and secure it with the plug spring supplied (3).
>>
Installation is complete.
Work steps - removing the second water connection
1. To remove, proceed in reverse order.
>>
The removal is complete.