Rational MI-2091, Инструкция по модификации

Страница: 6 / 32

1 | MI_2091: Installation energy optimisation board
6 / 32 MI_2091_V01
MI_2091_V01
4. Install the mount with 4 board retaining clips on the SSR carrier.
5. Insert the cables of the cable trunk W32 into the energy optimisation
board and screw them together. Use the cable ends with the shorter wire
end ferrules (8 mm).
Connection Wire colour Connector terminal
Phase Red L1
Neutral conductor (neutral wire) Blue N
Protective conductor Yellow/green PE
1. Attach the cable ends with the longer wire end ferrules (12 mm). Screw the
red cable to the red wire of the contactor (1). Attach the yellow-green wire
to the yellow-green clamp (2). Attach the blue cable to the blue clamp (3).
1
2
3