Ratio io5, Руководство по установке, Страница: 18 / 46

Installation | 18
+44 (0) 1527 396900 / info@ratioev.uk / www.ratioev.uk
18
Ratio io5 Charger Manual
1
(L)
(N)
MAINS
2
3
7 . Place the remaining current transformers around the other phase wires of the main power
grid, also between the main fuse and the consumer unit/solar panel connections.
8 . Insert the 3,5 mm jacks of the current transformers to the L2 and L3 input on the
Sensorbox.
1
(L)
(N)
MAINS
2
3
40 mm
9 . Strip the wires of the data cable (not included).
10 . Insert four wires of the data cable into the RJ10 connector.
11 . Secure the wires to the RJ10 connector. Use a RJ10 crimping tool.
12 . Write down the colours and order of the inserted wires of the data cable.
8. Insert the 3.5mm jacks of the current transformers to the L2 and L3 input on the
Sensor Box.
9. Strip the wires of the data cable (not included).
10. Insert four wires of the data cable into the RJ10 connector.
7. Place the remaining current transformers around the other phase wires of the main
power grid, and also between the main fuse and the consumer unit/solar panel
connections. Ensure the arrow within the CT clamp is pointing towards the main fuse.
11. Secure the wires to the RJ10 connector. Use a RJ10 crimping tool.
12. Write down the colours and order of the inserted wires of the data cable.
18
Ratio io5 Charger Manual
1
(L)
(N)
MAINS
2
3
7 . Place the remaining current transformers around the other phase wires of the main power
grid, also between the main fuse and the consumer unit/solar panel connections.
8 . Insert the 3,5 mm jacks of the current transformers to the L2 and L3 input on the
Sensorbox.
1
(L)
(N)
MAINS
2
3
40 mm
9 . Strip the wires of the data cable (not included).
10 . Insert four wires of the data cable into the RJ10 connector.
11 . Secure the wires to the RJ10 connector. Use a RJ10 crimping tool.
12 . Write down the colours and order of the inserted wires of the data cable.
40mm