Ratio io5, Руководство по установке, Страница: 10 / 46

Product description | 10
+44 (0) 1527 396900 / info@ratioev.uk / www.ratioev.uk
Charge modes
The charger has four available charge modes:
Basic The charger charges the EV using a set maximum current in Amps
(Maximum charging current). - no Load Balancing
Smart The charger only charges the EV when the available current is above
the minimum set current in Amps (Minimum charging current) and
below the maximum current that is still available on the main grid. *
SmartSolar The charger only charges the EV when the available current is above
the minimum set current in Amps (SmartSolar minimal charging current)
and below the maximum current that is still available on the main grid.
If the charger is charging the EV and there is still net current
generation, the charger uses this surplus of energy to charge the car in
addition to the minimum set current. *
PureSolar The charger only charges the EV when there is a net current generation
(e.g. from solar panels), that is above the minimum set current in Amps
(PureSolar minimal charging current). *
* Charging at a maximum current while protecting the building from over current loading
with Dynamic Load Balancing. While charging at home or commercial facility, the charging
current adapts to the maximum allowed consumption in the building.
Note: PureSolar mode is not compatible with Power Sharing . If you set the charge mode
to PureSolar, Power Sharing will be disabled.
3 Power LED
4 Fault LED
5 Charge LED
1 Front cover bezel
2 Charge socket (not on
tethered versions)
2.1. Charger Components
10
Ratio io5 Charger Manual
Charge modes
The charger has four available charge modes:
Basic The charger charges the EV using a set maximum power in Amps
(Maximum charging current). - no Load Balancing
Smart The charger only charges the EV when the available power is above
the minimum set power in Amps (Minimum charging current) and
below the maximum power that is still available on the main grid. *
SmartSolar
The charger only charges the EV when the available power is above
the minimum set power in Amps (SmartSolar minimal charging
current) and below the maximum power that is still available on the
main grid. If the charger is charging the EV and there is still net
power generation, the charger uses this surplus of energy to charge
the car in addition to the minimum set power. *
PureSolar The charger only charges the EV when there is a net power
generation (e.g. from solar panels), that is above the minimum set
power in Amps (PureSolar minimal charging current). *
* Charging at a maximum current while protecting the building from overcurrent loading
with Dynamic Load Balancing. While charging at home or an office building the charging
current adapts to the maximum allowed consumption in the building.
Note: PureSolar mode is not compatible with Power Sharing . If you set the charge mode to
PureSolar, Power Sharing will be disabled.
2 . 1 . Charger components
Power
Fault
Charge
1
2
3
4
5
1
Front cover ring
2
Charge socket
3
Power LED
4
Fault LED
5
Charge LED