34
DIVE SET 1
The DIVE SET 1 menu displays the first part of the iDive dive settings.
WATER:
(SALT/FRESH): It selects the kind of water (SALT= Salty, FRESH= fresh)
Did you know?
The dive computers measure the pressure and convert it depth using the water density as constant.
Without the SALT/FRESH setting the depth reading might be altered (If you dive in fresh water with
WATER=SALT setting the depth detected by the iDive will be lower than the real one, vice versa if you dive in salt
water with WATER=FRESH setting the depth detected will be higher than the real one.)
UNITS:
It selects the kind of unit of measurement you want to use:
m/°C = decimal metric system
(Metres | temperature in °Celsius | date dd/mm/yy | pressure in Bar | volume in Litres)
ft/°F = American habituals system
(Feet | temperature in ° Fahrenheit | date mm/dd/yy | pressure in Psi | volume in cubic feet)
MODE:
It sets your favourite kind of dive which will be activated by the iDive when
entering water.
ATTENTION
always check that the kind of dive matches with the one
actually carried out.
SCUBA
: the iDive begins a dive with tanks
GAUGE
: the iDive begins a dive in Gauge mode
FREE
: the iDive begins a free dive (without tanks).
Did you know?
If you want to use a different mode without changing the MODE parameter, you can enter the desired mode
pressing the D button in the watch screen and make a dive deeper than 2 m. This way, the iDive will activate the
mode you have selected without changing the MODE value for that dive only.
iDive
12:30
01/01 Th
95%
Unlocked
iDive
iDive
iDive
DIVE SET1
DIVE SET2
MIX
CCR SET
C
C
D
0.0
0
:00
0
0.0 0.0
OC
DIVE
m/min
DEPTH
Confirm
Confirm
Next
value
iDive
WATER:
UNITS:
MODE:
P.SAFE:
b
C
D
SALT
m/°C
SCUbA
0
EXIT
Warning
: For safety reasons, it is NOT possible to set the FREE mode as main mode if at least 12 hours have passed from the
last SCUBA or GAUGE dive. The
iDive reset the SCUBA mode automatically if you try to force your dive with the main mode set on FREE.