Ratio Basic, Руководство пользователя, Страница: 30 / 44

30
Ratio Smart/Solar Charger Manual
11
. Gently pull the excess data cable out of the charger.
12
. Repeat the installation steps for Sub chargers in daisy chain configuration.
Note:
Only the Main Controller is directly connected to the Sensorbox.
Note: When you use Ethernet, which is preferred instead of Wi-Fi, connect an Ethernet
cable with the pig-tail Ethernet connector inside the charger.
5 . 7 . Checks before finishing the installation
• Check if all phase, neutral and earthing wires are properly connected.
• Check if the data cables are wired correctly and the order of the coloured wires matches
on both sides.
• Check if all cables are free of damage and are properly secured.
• Check if the current transformers are properly installed around the phase wires of the
main power grid.
• Check if the current transformers are plugged into the correct phase inputs of the
Sensorbox.
• Check if the housing is correctly closed and no loose wires are visible or exposed.