28
A weighted sound pressure
L
pA
: 70.5 dB(A)
A weighted sound power
L
wA
:81.5 dB(A)
K
PA
& K
WA
3.0 dB(A)
Wear ear protection
TECHNICAL SPECIFICATION
Type AR36NM (CSD-designation of machinery, representative of Battery-powered Screwdriver)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value a
h
= 1.619 m/s²
Uncertainty K= 1.5 m/s²
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING:
To be accurate, an estimation of exposure level in the actual conditions of use should
also take account of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle but not actually doing the job. This may significantly reduce the exposure
level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
°
C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.
NOISE INFORMATION
Battery voltage:
3.6 V
Charger voltage:
100-240 V ~ 50/60 Hz
Battery capacity:
1.3 Ah Lithium
No-load speed:
180 /min
Max torque:
4 N.m
Charging time:
3-5 hr
Machine weight:
0.31 kg
