34
Ratio Electric Solar Box
Manual
6. Commissioning
Switch the Main Circuit Breaker (MCB) in the
consumer unit back on to provide power from the
main grid to the charger(s). The charger switches
on and boots up. The power LED lights up green to
indicate the charger is powered.
The booting sequence is finished when the display
shows the Home screen, with the active charge
mode displayed at the top.
MN
Basic mode
6.1. Initial configuration of the charger
NOTICE
The INSTALLER SETUP menu should only be accessed by a
qualified technician. In this menu you can adjust settings that, if
entered incorrectly, could damage the installation.
Before the charger is ready for use, you need to configure the initial setup parameters:
To enter the INSTALLER SETUP menu, press: ,
, , , and .
INSTALLER SETUP
<- CHG MODE ->
Note:
After 2 minutes of inactivity, the display automatically returns to the Home screen
without saving changes.
Note:
It is not possible to enter the settings menu during a charging session.
Use & to switch between the settings and press to enter the selected setting.
