39
b
a
c
D
Set a MIX using the Analyser
iX3M 2 can to set the MIX that you are analysing directly as a MIX that will be used
during the dive.
Once you can read the O2 value select the MIX that you want to set using C or D
buttons (SAVE TO MIX) and press B to SET the Mix
Always check the MIX TABLE before each dive and be sure that all the gases that you
are going to use in your dive are set as ON.
Remember that the safety approximation of the Mix has to be decided by the diver.
If you are not sure about the EAN safety approximation to be set for your dive, ask
your diving instructor or your diving certification agency.
miX analyser
o2: --.-
CALIBRATE
DEV FW 0.00
SET To MIX: 2
BACK SET - +
WARNING
: Diving with Enriched air mixes or with Trimix requires a specific training. Diving with EAN or Trimix without a
suitable training or without the due cautions is dangerous! If you have not received the specific training do not change
the MIX settings and do not dive with EAN or Trimix! Set mixes are considered in the decompression calculations. Do not
set mixes that are different from the mixes that you will use in your dive!