27
DIVE SET 1
WATER:
(SALT/FRESH/ EN13319): It selects the kind of water (SALT= Salty, FRESH= fresh,
EN13319= Standard water value used for certification (a sort of Salt/Fresh water mix)
Did you know?
The dive computers measure the pressure and convert it depth using the water density as constant.
Without the SALT/FRESH setting the depth reading might be altered (If you dive in fresh water with
WATER=SALT setting the depth detected by the iX3M 2 will be lower than the real one, vice versa if you dive in
salt water with WATER=FRESH setting the depth detected will be higher than the real one.)
DIVE MODE:
It sets the dive mode that will be activated by the iX3M 2 when entering
water.
ATTENTION
always check that the kind of dive matches with the one actually
carried out!
SCUBA
: the iX3M 2 begins a dive with tanks
GAUGE
: the iX3M 2 begins a dive in Gauge mode
FREE
: the iX3M 2 begins a free dive (without tanks).
CCR
: the iX3M 2 begins a rebreather dive.
it is NOT possible to set the FREE mode as main mode if at least 12 hours have passed from your last SCUBA, GAUGE
or CCR dive. The RATIO iX3M 2 sets automatically the SCUBA mode if trying to force the dive with the main mode set
on FREE.
PS0, GFL/GFH or R0:
See following pages
DECO CTRL:
(ON/OFF): If activated (ON) the iX3M 2 will not allow you to carry out a new
dive during the 12 hrs after a dive in which there have been several deco violations. The
DECO CTRL deactivation (OFF) is not recommended and will remain permanently in the
iX3M 2 Logbook.
ATTENTION: The Safety Stop is NOT considered to be mandatory in those dives carried out within the safety curve. The Safety Stop violation doesn’t
entail penalties in decompression during your next dives and it is not considered to be a “deco violation”. So DO NOT deactivate the DECO CTRL if
you don’t want to carry out the Safety Stop.
b
a
c
D
eXit
neXt
eDit
eDit
BACK
NEXT
<<
>>
DIVE SETTINGS 1
WATER:
DIVE MODE:
SALT
SCUBA
GFL/GFH:
93/93
ALGORITHM: BUL16C
DECO CTRL:
OFF
b
a
c
D
eXit
neXt
eDit
eDit
BACK
NEXT
<<
>>
DIVE SETTINGS 1
WATER:
DIVE MODE:
SALT
SCUBA
PS0:
0
ALGORITHM: BUL16C
DECO CTRL:
OFF
