pg. 6
S01-S04
S05-S06
S07-S08
2007
2008
SLT
TWT
DKP
01 - 04
05 - 06
07 - 08
2009
2010
2005
2006
PHONE 5
PHONE 6
PHONE 7
PHONE 8
Note: Do not use
the green and
brown pairs
PHONE 9
PHONE 10
2012
2011
PHONE 11
PHONE 12
Note:
DO NOT plug anything into the sixth card labeled “VMS”.
• Once all RJ45 connections are made, connect twisted, shielded pairs onto pigtail sides of the wiring harnesses
pg. 6
S01-S0
S05-S0
S09-S1
2003
2004
COMMAND CENTER 1
COMMAND CENTER 2
2001
2002
PHONE 1
PHONE 2
PHONE 3
PHONE 4
Note: Do not use
the green and
brown pairs
S13-S1
D1-2
T1-2
2007
2008
2005
2006
PHONE 5
PHONE 6
PHONE 7
PHONE 8
2011
2012
2009
2010
PHONE 9
PHONE 10
PHONE 11
PHONE 12
2015
2016
2013
2014
PHONE 13
PHONE 14
PHONE 15
PHONE 16
TELCO LINE 1
TELCO LINE 2
Page 6
Option 2: 56-96 Zone Systems
• Each card installed will have six RJ45 connections
• On top of each RJ45 interface there is a label indicating connection:
•
S01-S_
is the port used for connecting Emergency Phones
•
TD (1-2)(3-4)
with a dot under the D is the port used for connecting Command Center Phone(s)
•
TD (1-2)(3-4)
with a dot under the T is the port used for outside Telco Line
• Plug the supplied RJ45 pigtail cables into the RJ45 interface connections following the wiring chart and pin-out
color scheme below
• Refer to the top of the cards to see what type of RJ45 interface and number of extensions
• The same pin-out color scheme should be used for the primary card and for all additional cards
• The system uses T568-A for pin-out wiring
• The first card installed will always be:
•
Port 1:
(S01-S04) Connection for 4 Emergency Phones
•
Port 2:
(S05-S08) Connection for 4 Emergency Phones
•
Port 3:
(S09-S12) Connection for 4 Emergency Phones
•
Port 4:
(S13-S16) Connection for 4 Emergency Phones
•
Port 5:
(D1-2) Connection for up to 2 Command Center Phones
•
Port 6:
(T1-2) Connection for up to 2 outside Telco Lines
Card 2
Example
Card 1
Example
