Page 5
Programming
Items Needed:
1.
PC with Network Interface Card attached to same network as SIP Server
2.
Static IP Address for IP Interface (provided by building)
3
. IP Address of SIP Server or Web Address of ITSP (Internet Telephony Service Provider) (provided by building)
4.
Name, Authentication Password, and Authentication IP for SIP Extension (provided by building)
IP Interface Set-Up:
1.
Plug computer being used for programming into the same network switch as the IP Pool Phone
2.
Turn off wireless card on computer (if applicable)
3.
Change computer IP address
a. Navigate to
Control Panel
b. Open
Network and Sharing Center
c. Click
Change Adapter Settings
from left side menu
d. Right click on
Local Area Connection (or Ethernet)
then click
Properties
e. Double click on
Internet Protocol Version 4 (TCP/IPv4)
f. Click the dot next to
Use the Following IP Address
g. Set the IP Address to
192.168.1.100
h. Click on
Subnet Mask
, should auto-populate to 255.255.255.0
i. Click
OK
at the bottom of the window
j. Click
OK
in the
Local Area Connection Properties
window
4.
Log into IP interface
a. Enter IP address of IP interface (192.168.1.160) into web browser (Google Chrome or Mozilla Firefox
preferred)
b. Log into interface
LOGIN: admin PASSWORD: admin
5
. Under
QUICK SETUP
in Line 1, enter SIP server information
a. Enter IP address of SIP server or web address of ITSP into
PROXY
box
b. Enter extension name in
DISPLAY NAME
c. Enter authentication ID in
USER ID
d. Enter authentication password in
PASSWORD
e. Click
SUBMIT
at the bottom of the page (unit will automatically reboot)
6.
After unit reboots, change IP settings on IP interface
a. Click
Network Setup
under the menu options at the top of the screen
b. Enter desired
IP Address
,
Subnet Mask
, and
Default Router
for IP interface
c. Click
SUBMIT
at the bottom of the page (unit will automatically reboot)
7.
After unit reboots, follow the instructions in Step 4 to change IP address of computer to an address in the same
network scheme as the IP Pool Phone
8.
Log back into the IP interface using the IP address assigned to the unit in Step 6
9.
Click on
VOICE
under the menu options at the top of the screen
10.
Under Line 1 Status, verify unit shows
Registered
next to
Registration State
. If unit shows Registered, it is
ready for use. If unit shows Not Registered please verify SIP information or see Troubleshooting Section.
