Page 6
Programming
Handset Phones
Most Pool Phones are already pre-programmed to call 911. Only perform the following if you want the phone to
call somewhere other than 911. Please choose one of the options below that matches the type of line that the
phone is installed on:
1. Standard Telephone Line Programming
Note:
When programming, ignore messages or busy tones in the background.
a. Start with phone handset hung up
b. Press and hold
Program
button, lift handset off hook, then release
Program
button
c. Press the
#
key 10 times (you will hear confirmation tones in the handset)
d. Press
3
,
#,
then the phone number you want the phone to dial
e. Press
*
,
#
to exit Programming Mode, then hang up the handset
2. Switchboard Telephone Line Programming
(Hotel Industry)
Note:
When programming, ignore messages or busy tones in the background.
a. Start with phone handset hung up
b. Press and hold
Program
button, lift handset off hook, then release
Program
button
c. Press the
#
key 10 times (you will hear confirmation tones in the handset)
d. Press
3
,
#,
then press the access code for an outside line (usually 8 or 9)
e. Press
#
,
*
, then the phone number you want the phone to dial
f. Press
*
,
#
to exit Programming Mode, then hang up the handset
3. Ring-Down Telephone Line Programming
a. Start with phone handset hung up
b. Press and hold
Program
button, lift handset off hook, then release
Program
button
c. Press the
#
key 10 times (you will hear confirmation tones in the handset)
d. Press
3
then
#
e. Press
#
then
*
f. Press
*
,
#
to exit Programming Mode, then hang up the handset
Speaker Phones
Most Pool Phones are already pre-programmed to call 911. Only perform the following if you want the phone to
call somewhere other than 911. Please choose one of the options below that matches the type of line that the
phone is installed on:
1. Standard Telephone Line Programming
a. Press red
ON/OFF
button, phone should get dial tone, then slide
S15
to
ON/PROG
b. Press
1
,
*
, (key in phone number you want the phone to dial), then press blue
VOL
button
Note:
If a pause is needed as a part of the dialing, press the red
ON/OFF
button.
c. Slide
S15
back to
1
position, then press red
ON/OFF
button
2. Switchboard Telephone Line Programming (Hotel Industry)
a. Press red
ON/OFF
button, phone should get dial tone, then slide
S15
to
ON/PROG
b. Press
1
,
*
, key in access code (usually 8 or 9), press
ON/OFF
, (key in phone number you want the phone to
dial), then press blue
VOL
key
c. Side
S15
back to
1
position, then press red
ON/OFF
button
