Page 3
Description
Safety Guidelines
Figure 1: Front & Back View
• ADA compliant (hands free operation)
• LED call status indicator
• Powder coated aluminum construction
• NEMA 4 enclosure for electronics
• Conduit holes for easy installation
• Security torx screws for internal access
• Weather and vandal resistant
• Blue beacon and strobe
• Strobe turns on upon phone activation
• Ability to program up to 5 emergency numbers
• Remote or on-site programmable
• Save these instructions. This manual contains important instructions that will assist you during installation
and with maintenance.
• Keep all the components secure and protected during storage.
• Be careful of finished surfaces during transport and installation to avoid damaging the finish.
• Installation and maintenance should only be performed by qualified electricians.
• It is recommended a minimum of 2 people perform installation.
• Do not install phone during extreme weather conditions.
• Do not touch uninsulated phone wires or terminals unless the phone line has been disconnected at the
network interface.
• To comply with Americans with Disabilities Act (ADA) requirements, the Call Station must be mounted so that
the push button is less than 48” above the ground.
Features:
Height
30”
Width
10”
Depth
7-1/2”
Thickness of Aluminum*
0.090”
Weight
20 lbs.
Call Station Specifications:
*Stainless Steel Call Stations are 14 Gauge Steel
30”
10”
7-1/2”
8.5”
8”
4-1/2”
2-3/4”
2-3/4”
8”
2”
4”
6”
Front
Back
Bottom of Call Station
to Center Button
