RASOR RS1S, Инструкция по эксплуатации и обслуживанию

Страница: 4 / 12

4 https://www.rasor-cutters.com
GENERAL INFORMATION
1.2 Prohibitions
1.3
d
DO NOT
–
The product and its electrical or mechanical connections
MUST NOT be tampered with or modified.
–
It is FORBIDDEN to remove parts of the product.
–
It is FORBIDDEN to use the product in areas at risk of
explosion and/or fire.
–
It is FORBIDDEN to use the product or accessories with
wet hands. Risk of electrocution.
Handling and storage
The product must be stored in its original packaging and in a
dry, covered location away from heat sources, dirt and humidi-
ty. The product can be stored between 0° and 55°C.
1.4 Limits of use
All Rasor Elettromeccanica products are tested before being
shipped to the customer to guarantee safe and long-lasting
operation.
The product must be used solely for its intended purpose. Any
other use is forbidden and constitutes a risk.
The product operates at a maximum temperature of 55°C.
The protection rating of the device is IP 65.
1.5 Technical specifications
Model RS1S
Weight (with battery) 370 grams
Battery Li-ion® 5Ah
Protection rating IP 65
Motor power 32 W
Cutting capacity 15 mm
Motor speed 19,000 RPM
Operating temperature
0° to +55°C
Battery charge time 150 minutes
Buttons
For product use
1.6 Noise
The maximum sound pressure level emitted is approximately
60 dB (A). Airborne noise was detected in compliance with EN
ISO 15744:2008. The noise levels emitted by the device at vari-
ous detection distances (with no soundwave filtration system)
vary by a few db (A).
1.7 Limitation of liability
The manufacturer declines all liability for any damage and mal-
functions arising from:
–
failure to follow the instructions given in this manual
–
repairs not carried out in a workmanlike manner (the use of
non-original spare parts and accessories can adversely affect
product operation)
–
damage caused by arbitrary changes by
the user or by unauthorised interventions
–
failure to carry out maintenance as indicated
–
power supply faults
–
damage or defects caused by improper use
–
use by untrained or unauthorised personnel
–
damage or defects caused by failure to follow use and
maintenance instructions.
1.8 Identification data
A nameplate (1) stating the product data is applied to
the RS1S
. Ensure the nameplate has been applied to the prod-
uct; if not, inform the manufacturer and/or retailer immediately.
Devices without the nameplate must not be used, or the man-
ufacturer’s liability will be voided.
RSM22001 19.000
32
3.7
RS1S
1
Sample nameplate