6
EN
4. PRODUCT DESCRIPTION
The fixture described in this manual is a cutting unit model DD120ML which can be assembled
on automatic machines (e.g. spreaders, computerized cutting) by means of proper holes
located in the motor rest. DD120ML can operate continuously and it can cut at various
heights by means of multiple installation. The central upright of “Monster” type eliminates
the winding problem of composite materials, that is the winding of fibres behind the
blade. By cutting with the blade and the counterblade always in contact and thanks to the
steel upper quality of the blade supplied, DD120ML guarantees the clean separation without
frayings of the two borders of the cut material. The cutting time is halved and the material
can slide at a doubled speed, thus reducing idle time. The three-phase motor, with extremely
compact dimensions and extreme reliability with 120 mm diameter blades, guarantees cuts
with thickness up to 4 cm. A sharpener assembled on the cutting unit head allows whetting
the blade at any moment without disassembling it. After carrying out this operation, it is
possible to start cutting again. A high power motor, perfectly balanced, with a high number
of revolutions and totally free of maintenance, reduces the vibrations to the minimum, thus
making the cutting unit comply with European Directive No. 2002/44/EC concerning the
risks deriving from mechanical vibrations.The mechanical parts are made of high resistance steel,
bronze and aluminium.
1
14
2
12
7
9
8
6
3
10
13
11
5
4
1
Connector block
8
Hard metal counterblade coated
with titanium
2
Motor frame
9
Poligonal blade
3
Feed cable
10
Monster type upright
4
Motor cover
11
Sharpening button
5
Adjusting knob protection cover
12
Emery wheel
6
Anodized aluminium front
protection cover with adjustable
height
13
Motor rest
7
Aluminium base covered with
Teflon
14
Cable gland
Device components
