11
White Sand
FIGURE 8
Ember Boosters
1. Completely cover
Burner Pipe
and
Ember Boosters
with Pan Medium (White Sand) (Figure 8) Starting from one
leading edge of Burner Pan and moving toward the other leading edge. Use entire contents of bag provided, allowing
medium to spill over leading edges of burner pan (Figure 9). (Amount supplied will vary with each style burner)
If using a Natural Gas model, the Pan Medium used will be White Sand. The Volcanic Ash supplied may
only
be used
as dressing for the firebox floor ( Page 11, Figure 13)
NEVER
use Volcanic ash inside a natural gas burner pan.
2. Sprinkle a light covering of “ Ember Magic” over the Pan Medium (Figure 10 below). Pull apart “Ember Magic” fiber
material to enhance the glowing ember effect. Spread remaining “Ember Magic” around ends of pan to add to the
ember bed appearance. When done the Burner Pan should look somewhat like the illustration below.
FIGURE 9
STEP FIVE: PAN MEDIUM (NATURAL GAS MODELS)
WARNING: Wash hands after handling “Ember Magic” as it may cause skin irritation. When pouring Pan Medium
(White Sand) into burner pan do so slowly as it may stir up dust particles. Careful not to breath in dust.
FIGURE 10
Burner Pipe
A) Leading Edge of Burner Pan
A) Leading Edge of Burner Pan
NOTE:
Thinner, less densely packed
pieces of Ember Material will enhance the overall glowing ember effect, e.g., the
looser the pieces, the better the glowing ember effect!