Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507
|
|
951-654-3585
rashaprofessional.com
|
|
7
SETUP
Power Supply
Each
Arete
has an auto-ranging power supply that works with an
input voltage range of 100VAC, 60 Hz. To determine the power
requirements for each
Arete
refer to the label affixed to the product.
You can also refer to the Technical Specifications chart in this manual
The listed current rating indicates the maximum current draw during
normal operation. For more information, you may download Sizing Circuit
Breakers from the Rasha website: www.rashaprofessional.com
Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or fire. To eliminate
unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The
Arete
comes with a power input cord terminated with a Trueone type
®
connector on one end and an Edison plug on the other end (U.S. Market).
If the power input cord that came with your product has no plug, or if you
need to change the Edison plug, use the table below to wire the new plug.
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove the blown fuse and replace with a another fuse of the same
type and rating (F 10 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a
blown fuse. Always replace the blown fuse with another of the same type
and rating
Power Linking
0.25Amp @ 120V, On 20 AMP circuit, you can link up-to 580 Fixtures @
120V
DMX
Personalities
• The
Arete
uses a 3 pin DMX data connection for the 2 channel DMX
personalities.
• Refer to the Introduction chapter for a brief description of each DMX
personality.
• Refer to the Operation chapter to learn how to configure the
Arete
to
work in these personalities.
• The DMX Values section provides you with detailed information regarding
the DMX personalities
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
