Rasha Professional A/S 1800 Rustin Ave. Riverside CA, 92507
|
951-654-3585
rashaprofessional .com
|
9
Before mounting this product, read and follow the Safety Notes. For our
Rasha
®
Professional line of mounting clamps, go to
http://rashaprofessional.com/en/accesories
Orientation
Always mount this product in a safe position and make sure there is
adequate room for ventilation, configuration, and maintenance
Rigging
•
triggerclamp (not included), wall or stage floor in any orientation without
altering its operation characteristics.
•
Use proper bolts to mount the device via its brackets. The
brackets should be attached to the device with proper bolts!
• Always use a secondary safety rope that can
hold at least 10 times the weight of the device.
• The minimum distance between the device and illuminated surface is 1
meter. There should not be any flammable materials 10 meters around
the device
Procedures
The
Photon Hybrid
comes with a preinstalled mounting surface to which
you will be able to attach our clamps found at www.rashaprofessional.com/
en/accesories. Make sure the clamps are mounted properly. In addition,
use a safety cable to link the product to the structure.
MOUNTING
Make sure there is no flammable material nearby during the istallation.
Follow. Follow the instructions Stated in this manual, and on the bottom
of the base device.
Use 2 Clamps to rigg the fixtuer onto a truss. Make sure it is fixed properly
and enssure the truss or your mounting rigg is secure!
