RASHA PROFESSIONAL PHOTON HYBRID, Быстрое руководство пользователя

Страница: 10 / 32

Rasha Professional A/S 1800 Rustin Ave. Riverside CA, 92507
|
951-654-3585
rashaprofessional .com
|
info@rashaprofessional.com
10
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller
with the fixture or one fixture with another.
BUILDING A SERIAL MASTER-SLAVE / DMX-CHAIN
For Master-slave connection, you need to set a device as the Master device. All other devices will be the
slave devices.
Connect the DMX-output of the first device (Master) in the chain with the DMX-input of the second
device (the first slave device). Connect the DMX-output of the second device (the first slave device) with
the DMX-input of the third device (the second slave device). Always connect one output with the input of
the next device until all devices are connected.
Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120Ω resistor
between Signal (-) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture.
BUILDING A SERIAL MASTER-SLAVE / DMX-CHAIN:
For Master-slave connection, you need to set a device as the
Master device. All other devices will be the slave devices.
Connect the DMX-output of the first device (Master) in the
chain with the DMX-input of the second device (the first slave
device). Connect the DMX-output of the second device (the
first slave device) with the DMX-input of the third device (the
second slave device). Always connect one output with the
input of the next device until all devices are connected.
Caution: At the last fixture, the DMX-cable has to be terminat -
ed with a terminator. Solder a 120Ω resistor between Signal
(-) and Signal (+) into a 3-pin XLR-plug and plug it in the
DMX-output of the last fixture.
MASTER-SLAVE