Rasha Professional A/S 1800 Rustin Ave., Riverside
CA, 92507
|
951-654-3585
rashaprofessional .com
|
12
2. Parameter value setting
Press MENU to navagate menu
• press <UP> or <DOWN> to scroll to correct setting. Touch <Enter> to enter sub
menu.
• Set and save value. Touch <ENTER> submenu.
3. Sub-Menu
• Select desired sub menu from main menu to enter corresponding sub menu shown
below. There is a of total 14 menu programs, includes class of parameter and
status:
• Addr
- Select/ Set DMX address
• CHNd
- Select DMX Channels 7/12
• SlNd
- Select Enable Slau(Set Slave Mode), Nast(Set Master Mode),Sync(Wire-
less Transmission) or CliC(IR mode on /off)
• SHNd
Show and more(Preset color, fade, flas , Auto modes)
• COlO
- Select color presets
• Fade
- Select Fade option 1-3
• Flas
-Flas speed set
• Auto
- Set Auto mode
• SOUN
- Select Preset Sound effect option 1-5
• CUst
- Set values for up to 5 custom Color
• DINN
- Select or set Dimmer /brightness
• BlNd
- Black out
• LED
- Turn off LED display
• DIsp
- Invert Dispaly
• Test
- Test Mode
• Fhrs
- Fixture Hours
• Ver
- Firmware Version
• Rest
- Rest all values to Factory Settings
How to set fixture in Master Mode: Press Menu button, select “
SLND
” Press “Enter” Select “
NAST
”
Press “Enter”. Now your fixture in Master mode, now you can set preset shows from “
SHND
”
How to Set fixture in Slave Mode : Press Menu button, select “
SlND
” Press Enter, Select “
SLAU
”
Press Enter. Now your fixture in Slave Mode, now you can control from DMX controller/Receive
command from master fixtures.
