b.
Using a Universal cable kit (CCPnnU), plug the 25-pin
connector into one of the numbered Channels on the
base MasterConsole II back panel.
c.
Plug the cable's other connectors into the computer's
keyboard, monitor, and mouse ports. Use supplied
adapters for AT style PCs.
See Figure 5.
d.
Power ON the connected computer.
e.
Select the connected computer by pressing the
corresponding front panel button. Verify that the monitor
attached to MasterConsole II displays the video for the
connected computer. Use the keyboard and mouse
attached to the base MasterConsole II to verify that
they operate the connected computer.
f.
Repeat Steps
3.a
through
3.e
to connect additional
computers to the base MasterConsole II.
Connect Second-Tier MasterConsole(s) to the Base Unit
4.
Connect MasterConsole(s) to any Channel(s) of the base
MasterConsole II.
17
Figure 13
.
Two-Tier Configuration Cabling Details
