Chapter 3: DX Series
30
The label attached to DX-D4C3 helps you identify each channel.
DX-D4C3 Label:
CC represents a contact closure sensor channel. There are three CC
channels: CC1 through CC3.
DC represents a dry contact signal actuator channel. There are four
DC channels: DC1 through DC4.
DX-D4C3 terminals, dip switches, and LEDs:
Terminals, dip switches, and LEDs are located in two rows as shown
below.
Numbers
Components
CC and DC channels.
Top row:
2 CC channels (CC2 - CC3).
4 DC channels (DC1 - DC4).
Bottom row:
One CC channel (CC1).
See
Connecting Detectors/Actuators to DX
(on page 34)
for how to connect CC sensors or DC actuators.
Dip switches for configuring the Normal state of each CC
channel. See
Adjusting Dip Switches
(on page 38).
Top row:
