manualshive.com logo in svg

Rare Waves Grendel 2TAC, Руководство пользователя

Поделиться
Скачать
Rare Waves Grendel 2TAC Скачать руководство пользователя страница 14

Pattern Write - Real Time Edit

Add Note Events

Play the Keys in real time to over-write existing note events

You can record a pattern in real time by performing the events on the Keys.  Your live input is quantized to the grid of the clock input.

To write a pattern on Track 1, follow these steps:

First, select the pattern you want to edit.  Turn the Mode Switch to PTN1 and look at the Key LEDs.  The bright LED is is the pattern that will 
be edited.  To choose a different pattern for editing, tap a different Key.  Audition the patterns with the Play and Stop buttons.
Then, turn the Mode Switch to KBD 1 and press Play to start the transport. Now hold the EDIT button to enter Real Time Edit.  

If the Click track is enabled, it sounds a double-click every time the pattern’s loop point is reached, providing an audible reference point.

* If a Pattern Chain is active, Real Time Edit will affect all the patterns in the chain as they appear during playback.  Results can be unpredictable.

Hold while transport is playing

In           mode, while the transport Is playing, hold the EDIT button to enter Real Time Edit.  

Erase Notes

Hold LOOP(rest) while pressing a Key to erase events on that Key in real time

Undo Changes

Turn the Mode Switch to another position.  Any edits will be discarded.

Save and Exit

Hold the EDIT button again so its LED goes dark.  Any changes are saved to memory.

Switch to Step Edit

Press Stop.  Playback stops, and you are now in Step Edit mode at Step 1 of the pattern.

Nudge Loop Point

Hold LOOP and tap CUE1 (<<) to shorten loop by 1 step, CUE2 (>>) to lengthen

Reset Loop Point

Hold LOOP while tapping STOP to reset pattern length to 32 steps

Set Loop Point

Double-tap LOOP to set the pattern’s loop point in real time

Содержание Grendel 2TAC



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды