NINOX 640 II/USER MANUAL/09-20/REV1.1
1. INTRODUCTION
This document provides detailed instructions for the operation of the Ninox 640 II camera.
Raptor Photonics Limited reserves the right to change this document at any time without
notice and disclaims liability for editorial, pictorial or typographical errors.
1.1 Scope
This manual covers the Ninox 640 II digital camera and all applicable components. The
Ninox 640 II is the next generation of the highly successful Ninox 640. With an ultra-low
typical readout noise (rms) of 18e- and a typical dark current reading of <1,500e-/p/s at -
15°C, the Ninox 640 II improves even further on its noise performance. The mechanical
design of the camera is also much improved and the camera is significantly more compact
than the initial Ninox 640. It is one of the most compact scientific SWIR cameras available on
the market. Raptor recommends that this manual be used to optimize camera operation.
Details of the camera’s mechanical and electrical interfaces are provided. Important
precautions to be taken when using the camera are also stated.
Detailed information is also provided on each of the cameras control parameters. Each
camera control is discussed and explained with the use of XCAP Imaging software, which is
the core plug and play software package that is offered with Raptor cameras. An image of
the camera is shown in Figure 1.
Figure 1: Complete Camera Module.
