16
SW1200 SOUND VOLUME SETTINGS
KEY
FUNCTION
SOUND SLOT
CV
DEFAULT
YOUR VALUE
Master Volume
63
125
F1
Bell
4
283
60
F2
Horn
3
275
192
F3
Curve Squeal
23
435
50
F4
Dynamic Brake
6
299
100
F5
Doppler Horn
28
475
192
F8
Prime Mover
1
259
128
F10
Independent Brake
11
339
100
Radiator Fan
8
315
100
Compressor
7
307
75
Short Air Let Off
24
443
20
FACTORY RESET
On your SW1200, you perform a factory reset by entering a value of “8” into CV 8.
Note that this will cause all of your new volume and motor settings to be lost, so you will
need to reprogram any settings that you want to keep. What do you mean, you didn’t
take any notes? WE JUST TOLD YOU TAKE NOTES. You’re out of the band.
You can NOT lose all of the pre-recorded sounds on your SW1200 decoder by doing a
factory reset. However, after performing a factory reset your SW1200 may begin to do
the Watusi and recite lines from Apocalypse Now. If that happens, you have probably
lost your mind. Those elephants are not real. Lie down, relax and maybe the drumming
noise in your head will stop. Dum-dum-dum-dum. Dum-dum-dum-dum.
MORE INFORMATION
While addressing the features that most modelers will need for normal operation, these
instructions have covered just a small number of the many customizable features of
your ESU LokSound decoder. For advanced users who want to more fully explore the
capabilities of the decoder we suggest downloading the ESU LokSound Select decoder
manual. This is available on the SW1200 page in the Support section of our web site.
LIMITED LIFETIME WARRANTY
We will do our best to solve any problems or issues that you may have with your
SW1200 locomotive. If your locomotive has any defects that originate from the factory,
we will repair your locomotive using new components or replace it outright should a
repair not be possible. However, we can only replace your locomotive while we have
