Assembly instruction
|
3
4. OPERATION
UP / DOWN operation :
Push the buttons for operation up or down
5. MAINTENANCE AND DEFECTS
– The table does not require any maintenance by usage as described in chapter 2 in the directions for use.
– The table is only to be maintained with a damp cloth.
– In the event of the occurrence of jarring sounds during operation, STOP using the table and please contact the dealer.
6. TECHNICAL DATA
Frame, materials :
Steel, powder lacquered
Weights ( frame ):
27 kg | 29 kg | 31 kg
Width :
1200 x 1200 mm | 1500 x 1500 mm | 1800 x 1800 mm
Depth :
700 mm
Height
( frame ) :
660 -1180 mm
V
( speed ) :
~ 25 mm / sec., depends on load.
F
MAX
= Max. load :
100 kg ( evenly distributed on frame )
Duty cycle :
10 % by 50 % of max. load on frame or max. 2 min. continuously
Operation :
Micro switches
Voltage :
100 -240 VAC | 50 / 60 Hz
Consumption :
80 Watt
Standby Consumption :
< 0,4 Watt
Above specifications may vary depending on local temperature, humidity and input voltage.
7. PARTS
See page 4.
8. ASSEMBLY DIRECTIONS
See pages 5 - 7.
9. DECLARATION OF CONFORMITY
We hereby declare, under our sole responsibility that the following products :
– Sit and stand table product type SS-SPLEG PS combined with SS-SPCNR PS
is in accordance with :
– Directive 2006 / 42 / EF of The European Parliament and of the Council of 17 May 2006 on machinery
and on changes of directive 95 / 16 / EF
With reference to the above please be aware that :
– the sit and stand table is considered a machine and
– the sit and stand table may not be used until it has been assembled and installed according to the instructions.
Manufacturer :
FurnX Pty Ltd
PO Box 357
Zillmere, QLD 4034
Australia
Phone : 07 3263 1848 / Fax : 07 3263 4134
www.rapidline.com.au
