12345678
12345678
12345678
6. Servicing
It is assumed that you have read and under-
stood the chapter entitled Safety and Dan-
gers.
Cleaning and servicing work, as well as removal of
the safety equipment, must only be performed
while the drive is switched off and the engine is at
a standstill. The spark plug socket must be pulled
off. Be careful of the power take-off shaft drive!
After cleaning, all parts must be lubricated as
shown in the Servicing Schedule.
Regularly check nuts and bolts for tight fit.
No repairs must be carried out on the hydrostatic
axle.
If the snowthrower is not used for longer than 2
months, we recommend emptying the carburettor
on the petrol engine and the petrol tank. This will
avoid deposits in the fuel system.
Engine:
- Check oil level and top up if necessary
For the first oil change
, see the Engine In-
struction (SAE 10W/40)
Engine: 9 PS Honda
1,1 litres
- Clean the air filter
- Clean the cooling air intake filter
- Check the expansion cylinder / oil level
SAE 20W/50 (see page 42)
Worm drive
- Check oil level and top up if necessary
(SAE 90 EP) 0,1 litres
Basic machine:
- P.T.O shaft supports, lubricating nipple(s)
- Check tyre pressure
- Handlebar bearings, lubricating nipple
6.1 Servicing Schedule
Regular servicing is restricted to the following points, which must nevertheless be strictly observed and carried
out correctly.
What
do I do
When
daily
SERVICE
once
per
year
weekly
monthly
as
required
after mowing
See
Operating
Instructions
for
engine
49
1234567
1234567
1234567
1234567
1234567
1234567
1234567
1234567
12345678
12345678
12345678
12345678
12345678
12345678
12345678
12345678
12345678
12345678
12345678
